Suzuki Df6 Owners Manual

Posted on by admin

RELATED SUZUKI OUTBOARD SEARCHES:

PROPELLERS

An outboard motor is designed to develop its rated power within a specified engine speed range. The maximum rated power delivered by the Suzuki models are shown in your service manual. If the standard propeller fails to meet the above requirement, use another pitch propeller to hold the engine speed within the range specified in your manual propeller selection chart.
Installing a propeller with pitch either too high or too low will cause incorrect maximum engine speed, which may result in severe damage to the motor.

  1. Suzuki Df6 Outboard Owners Manual As recognized, adventure as with ease as experience very nearly lesson, amusement, as well as treaty can be gotten by just checking out a book suzuki df6 outboard owners manual furthermore it is not directly done.
  2. Suzuki Outboard 2-Stroke Engines 1988-2003 Repair & Service Manual: List Price $45.99: Your Price $39.95: Seloc manual 1600 (book) covers 1988-2003 Suzuki outboard 2-225 HP, 1- to 3-cylinder, V4 & V6, 2-stroke engine models (including fuel injection and jet drives).

Suzuki DT40 Owners Manual RUS.pdf. Suzuki DT40W(E)/ WR Owners Manual RUS.pdf. Suzuki DT40WK Owners Manual RUS.pdf. I have a 2010 DF6 Sn: 00602F-010724 I'm looking for the Service manual on this outboard engine. I have the owners manual. What I need is the installation instructions for installing the. Suzuki DF9.9 DF15 outboard boat 4 stroke motor service workshop manual. Carburetor Carb 13200-91J70 Fits Suzuki 4 Stroke DF6 DF4 Outboard Motor.Description Suzuki DF4DF6 User Manual Suzuki designed the DF4 and DF6 to be. The DF4 and DF6 are 4-strokes so you can expect clean, economical.

Disassembly of propeller shaft components

1. Slide propeller shaft away from reverse gear housing assembly

Account for reverse gear back-up shim thrust washer

2. Remove horizontal slider and forward gear thrust washer

3. Remove spring

4. Using special tool, push dog pin shifter.

5. Remove clutch dog shifter propeller shaft.

PROPELLER

Suzuki Df6 Owners Manual

• Inspect propeller for bent, chipped or broken blades and replace or repair if necessary.

• Inspect propeller bushing splines for wear or other damage and replace if necessary.

• Inspect propeller bushing for deterioration or slipping and replace if necessary.

PROPELLER SHAFT COMPONENTS

• Inspect horizontal slider and connector pin for excessive wear or other damage. Replace if necessary.

• Inspect clutch dog shifter for excessive wear, chip or other damage. Replace if necessary.

• Inspect dog pin for bent or other damage. Replace if necessary.

Suzuki Outboard Shop Manuals

• Inspect propeller shaft / splines for wear, twist or other damage. Replace if necessary.

PROPELLER SHAFT BEARING HOUSING

• Inspect housing for cracks or other damage. Replace if necessary.

• Inspect propeller shaft bearings and reverse gear bearing for pitting, rough or other damage. Replace if necessary.

• Inspect oil seals and O-ring for cuts, nicks or tears.

Replacing propeller shaft oil seal

1. Remove retaining ring

2. Extract oil seals

1 and washer 2.3 using oil seal remover.

Do not re-use oil seal once removed.

Always use a new oil seal.

3. Apply Water Resistant Grease to inner circumference of housing.

4. Using an oil seal installer, drive two oil seals (one at a time) into housing.

The lipped portion of seal should face towards propeller.

Apply Water Resistant Grease to seal lips.

5. Install washer and retaining ring.

Suzuki Outboard Manuals Free Download

PROPELLER INSTALLATION

1. Install spacer shaft, then slide on propeller

Suzuki Df6 Service Manual

2. Fit spacer specified torque.

1 and propeller stopper 2 onto propeller3.4, washer 5 and nut 6, then tighten nut to

Propeller nut : 55 N.m (5.5 kg-m, 40.0 lb.-ft.)

3. Push cotter pin secure.

PROPELLER SELECTION FOR COUNTER

Suzuki Df6 Owners Manual For Sale

ROTATION

Suzuki Df6 Owners Manual Model

For counter-rotation model, newly designed stainless steel propellers are available as follows.

Suzuki highly recommend to use the genuine Suzuki counterrotation propeller for the counter rotation model. In case of twin installation, always use on both engines, the same size normal rotation and counter-rotation propellers.

ENGINE CRANKED, BUT NOT START (OR STOPS SHORTLY AFTER STARTING)
UNSTABLE IDLING / TROLLING (OR ENGINE TENDS TO STALL)

• Incorrect by-pass air screw adjustment [NOTE3]
• IAC valve failure [NOTE3]
• IAC passage failure (clogged hose, etc.) [NOTE3]
• Spark plug failure
• Ignition coil failure
• ECM failure
• Wire continuity / connection failure
• Failure of high pressure fuel system components :
• Fuel injector (clog, stuck valve, etc.)
• Fuel pressure regulator (incorrect regulated pressure, etc.)
• Fuel pump (clogged suction filter, leakage in tank, etc.)
• Fuel filter (clog, etc.)
• Hose (clog, kink, leakage, etc.)